Acta Chimica Sinica ›› 2002, Vol. 60 ›› Issue (8): 1497-1501. Previous Articles     Next Articles

Original Articles

仿贝壳结构的自组装纳米复合薄膜的制备、表征及摩擦学性能研究

张晟卯;高永建;张治军;党鸿辛;刘维民;薛群基   

  1. 河南大学,开封(475001);固体润滑国家重点实验室.中国科学院兰州化学物理 研究所,兰州(730000)
  • 发布日期:2002-08-15

Preparation, Characterization and Tribological Behavior of Self- assembled Nanocomposite Thin Film with Mimic Nacre Structure

Zhang Shengmao;Gao Yongjian;Zhang Zhijun;Dang Hongxin;Liu Weimin;Xue Qunji   

  1. Laboratory of Special Functional Materials, Henan University, Kaifeng(475001);State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences,Lanzhou (730000)
  • Published:2002-08-15

The composite thin film of TiO_2/organic compound was prepared on glass substrate using supermolecular self-assembly method. The structure of the thin film was characterized by means of Fourier transform infrared spectrometry, X-ray photoelectron spectrometry, X- ray diffraction, and transmission electron microscopy. THe friction behavior of the composite thin film in sliding against AISI-52100 steel was investigated with a DF-PM friction coefficient measurement apparatus. The results indicate that the thin film is composed of organic and inorganic layers in alternately orderly arrangement. The distance between the organic layer and inorganic layer is 4.20 nm before polymerization and 3.91 nm after polymerization. The friction coefficient of the film sliding against steel is 0.1, which is much lower than 0.87 - the friction coefficient for glass sliding against the steel. Moreover, the polymerized film has longer antiwear life than the unpolymerized one.

Key words: NANOPHASE MATERIALS, THIN FILMS, TRIBOLOGICAL PROPERTY, HYBRID MATERIALS, STRUCTURE CHARACTERISTICS

CLC Number: