Acta Chimica Sinica ›› 2024, Vol. 82 ›› Issue (6): 570-576.DOI: 10.6023/A24020049 Previous Articles     Next Articles

Article

静电纺丝法制备聚偏二氟乙烯-六氟丙烯电解质膜用于电化学执行器

汪莎莎a, 孟鹏辉a, 李阳a, 邓慧婵a, 郭志翔a, 刘一任a, 石乃恩b, 魏颖a,*(), 解令海a,*()   

  1. a 南京邮电大学信息材料与纳米技术研究院 有机电子与信息显示国家重点实验室 分子系统与有机器件研究中心 南京 210023
    b 福建师范大学海峡柔性电子(未来科技)研究院 福州 350117
  • 投稿日期:2024-02-07 发布日期:2024-05-28
  • 基金资助:
    南京邮电大学自然科学基金(NY222157); 南京邮电大学自然科学基金(NY221085); 有机电子与信息显示国家重点实验室(GZR2022010008); 江苏省低维材料化学重点实验室开放课题(JSKC20022); 国家留学基金(202008320051); 国家基础科学中心(62288102)

Preparation of Polyvinylidene Fluoride-Hexafluoropropylene Electrolyte Membrane by Electrospinning Method for Electrochemical Actuators

Shasha Wanga, Penghui Menga, Yang Lia, Huichan Denga, Zhixiang Guoa, Yiren Liua, Naien Shib, Ying Weia,*(), Linghai Xiea,*()   

  1. a Centre for Molecular Systems and Organic Devices (CMSOD), State Key Laboratory of Organic Electronics and Information Displays & Institute of Advanced Materials (IAM), Nanjing University of Posts & Telecommunications, Nanjing 210023, China
    b Fujian Cross Strait Institute of Flexible Electronics (Future Technology), Fujian Normal University, Fuzhou 350117, China
  • Received:2024-02-07 Published:2024-05-28
  • Contact: * E-mail: iamywei@njupt.edu.cn; iamlhxie@njupt.edu.cn
  • Supported by:
    Natural Science Foundation of Nanjing University of Posts and Telecommunications(NY222157); Natural Science Foundation of Nanjing University of Posts and Telecommunications(NY221085); State Key Laboratory of Organic Electronics and Information Display(GZR2022010008); Key Laboratory of Low-dimensional Materials Chemistry of Jiangsu Province(JSKC20022); National Overseas Study Fund(202008320051); National Basic Science Center(62288102)

The microstructure of the electrolyte layer in electrochemical actuators significantly influences ion storage and transport, mechanical properties, and the final actuator deformation performance. In this study, two types of polyvinylidene fluoride-hexafluoropropylene (PVDF-HFP) electrolyte films with varying fiber diameters were prepared by electrospinning for electrochemical actuators. We controlled the diameters of the fibers by adjusting the concentrations of the polymer solution, while the film is carefully controlled to a consistent size in length, width, and thickness. Subsequently, the fiber film was immersed in the ionic liquid to achieve excellent electrolyte film performance. A poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) (PEDOT:PSS) electrode thin film was prepared using a drop coating method. Finally, an electrochemical actuator was prepared by hot pressing the electrode and electrolyte films. Compared with the drop-coated electrolyte film, the electrospun counterparts exhibit an excellent flexibility and a porous structure. Among them, the film with a larger fiber diameter (PVDF-HFP 22% (w)) reveals better tensile stress (7.52 MPa), tensile strain (235%), porosity (74%) and surface capacitance (39.8 mF•cm-2), and its tip displacement is 9.6 mm at ±0.5 V and 0.1 Hz, which is 1.48 times that of the smaller fiber diameter sample (PVDF-HFP 16% (w)) and 3.69 times that of the drop-coated sample, respectively. When at ±2 V and 0.1 Hz, the displacement is as high as 24.3 mm, which is 1.19 times that of the smaller fiber diameter sample (PVDF-HFP 16% (w)) and 1.46 times that of the drop-coated sample, respectively. Under the driving voltage of ±0.5 V and 0.1 Hz, after 10000 cycles, the driving displacement of PVDF-HFP 22% (w) electrochemical actuator can still reach 98% compared with the initial state. By improving the microstructures of electrolyte films through electrospinning, we successfully realized the preparation of high-performance electrochemical actuators, which provides a new idea for the development of soft robots in the future.

Key words: electrospinning, polyvinylidene fluoride-hexafluoropropylene, electrolyte membrane, electrochemical actuator, fiber diameter