化学学报 ›› 2007, Vol. 65 ›› Issue (12): 1185-1189. 上一篇    

研究简报

基于自组装多层膜的葡萄糖表面等离子体共振传感器

羊小海, 黎振华, 王青, 王柯敏*   

  1. (湖南大学化学生物传感与计量学国家重点实验室 生物医学工程中心
    生物纳米与分子工程湖南省重点实验室 长沙 410082)
  • 投稿日期:2006-10-09 修回日期:2007-01-14 发布日期:2007-06-28
  • 通讯作者: 王柯敏

A Glucose-Selective Surface Plasmon Resonance Sensor Based on Self-assembled Multilayers

YANG Xiao-Hai; LI Zhen-Hua; WANG Qing; WANG Ke-Min*   

  1. (State Key Laboratory of Chemo/Biosensing and Chemometrics, Biomedical Engineering Center, Hunan University; Key Laboratory for Bio-Nanotechnology and Molecular Engineering of Hunan Province, Changsha 410082)
  • Received:2006-10-09 Revised:2007-01-14 Published:2007-06-28
  • Contact: WANG Ke-Min

利用伴刀豆球蛋白A和糖类的特异性相互作用, 研制了葡萄糖表面等离子体共振传感器. 传感器的敏感膜是构建于金膜表面的伴刀豆球蛋白A/葡聚糖自组装多层膜. 在葡萄糖的存在下, 该自组装多层膜被分解, 引起表面等离子体共振信号的显著变化, 信号变化的大小与葡萄糖的浓度相关. 结果表明, 利用该传感器可以选择性地检测0.1~50 mmol•L-1浓度范围内的葡萄糖, 且敏感膜可以多次再生使用.

关键词: 表面等离子体共振, 伴刀豆球蛋白A, 葡聚糖, 葡萄糖

A glucose-selective surface plasmon resonance sensor was constructed by using specific interaction between concanavalin A and sugars. The sensing element was self-assembled multilayers of concanavalin A and dextran formed on gold film. In the presence of glucose, the self-assembled multilayers were disintegrated. As a result, the surface plasmon resonance signal was changed evidently. The signal changes were correlative to the concentration of glucose. The results showed that this sensor could detect the glucose selectively in the range of 0.1~50 mmol•L-1, and the sensing element could be regenerated for several times.

Key words: surface plasmon resonance, concanavalin A, dextran, glucose