喷墨打印高精度图案研究进展

doi:10.6023/A12050199

化学学报 ›› 2012, Vol. 70 ›› Issue (18): 1889-1896.DOI: 10.6023/A12050199 上一篇下一篇

综述

喷墨打印高精度图案研究进展

邝旻旻, 王京霞, 王利彬, 宋延林

中国科学院化学研究所北京 100190

投稿日期:2012-05-14 发布日期:2012-08-17
通讯作者: 宋延林
基金资助:
项目受国家自然科学基金(50973117, 21074139, 91127029, 51173190, 20904061, 50625312, U0634004, 20721061)和973计划(Nos. 2009CB930404,2011CB932303, 2011CB808400)资助.

Research Progress of High-precision Patterns by Directly Inkjet Printing

Kuang Minxuan, Wang Jingxia, Wang Libin, Song Yanlin

Laboratory of New Materials, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190

Received:2012-05-14 Published:2012-08-17
Supported by:
Project supported by the National Natural Science Foundation of China (Nos. 50973117, 21074139, 91127029, 51173190, 20904061, 50625312, U0634004, and 20721061) and 973 Program (Nos. 2009CB930404, 2011CB932303, and 2011CB808400).

文章分享

摘要/Abstract

近年来, 功能材料的图案化及其在高性能光电器件的应用研究受到了广泛关注. 与传统图案化方法相比, 喷墨打印技术更容易实现大面积复杂图案的直接书写和复合功能材料的图案化, 且制备简便, 成本低廉, 使其成为最受关注的图案化方法之一. 综述了近年来喷墨打印制备高精度图案的研究进展. 包括通过优化墨滴的化学组成、调控基材的化学或物理结构以及改进喷墨设备等方法以提高喷墨打印分辨率; 以及通过控制液滴内部的毛细流动和三相接触线的移动抑制喷墨液滴的“咖啡环”效应, 以实现均质打印. 文章最后展望了喷墨打印制备高精度图案的研究发展方向. 这些工作对于实现高性能器件的制备具有重要意义.

关键词: 喷墨打印, 图案化, 高精度, 咖啡环

High-precision patterns have aroused wide attention due to their important applications in high-performance optical/electrical devices. By virtue of easy and direct writing of desired patterns, high throughput and low-cost, inkjet printing has become one of the most promising candidates for the manufacture of patterns, compared with conventional approaches such as photolithography, microcontact printing. Various materials can be precisely deposited on target positions. As a primary focus, improving the precision of printed patterns would greatly enhance the performance of the devices. So far, various approaches have been developed for improving the printing precision. Pattern resolution is limited by the volume of jetted droplet and the area of droplet spreading on substrate. Finer resolution can be achieved through reducing the deposition dimension, i.e. optimization of the chemical composition of ink, chemical/physical modification of substrates, and improvement of printing apparatus. Besides, uniform deposition of functional materials is also essential for fabricating high-precision patterns and high-performance devices. “Coffee ring” is a common phenomenon during the drying process of droplets, which is generated due to the pinning three phase contact line (TCL) and the outward capillary flow in an evaporating droplet. Therefore, homogenous deposition without “coffee ring” effect can be realized by tuning the capillary flow in the droplet and controlling the movement of the TCL as the droplet evaporating. In this paper, we presented the recent research progress for achieving high-precision patterns by inkjet printing, including minimizing the deposition dimension to improve the resolution and avoiding the “coffee ring” effect to achieve high uniformity. These reports will probably promote the development of novel and facile method for high-precision inkjet printing. New trends and research perspectives were briefly discussed at the last section of this review.

Key words: inkjet printing, patterning, high-precision, coffee ring

引用此文

邝旻旻, 王京霞, 王利彬, 宋延林. 喷墨打印高精度图案研究进展[J]. 化学学报, 2012, 70(18): 1889-1896.

Kuang Minxuan, Wang Jingxia, Wang Libin, Song Yanlin. Research Progress of High-precision Patterns by Directly Inkjet Printing[J]. Acta Chimica Sinica, 2012, 70(18): 1889-1896.

导出引用 EndNote|Reference Manager|ProCite|BibTeX|RefWorks

分享此文

参考文献

[1] Hwang, J. K.; Cho, S.; Dang, J. M.; Kwak, E. B.; Song, K.; Moon, J.; Sung, M. M. Nat. Nanotechnol. 2010, 5, 742.

[2] Tan, C. P.; Cipriany, B. R.; Lin, D. M.; Craighead, H. G. Nano Lett. 2010, 10, 719.

[3] Minari, T.; Liu, C.; Kano, M.; Tsukagoshi, K. Adv. Mater. 2012, 24, 299.

[4] Ito, T.; Okazaki, S. Nature 2000, 406, 1027.

[5] Geissler, M.; Xia, Y. N. Adv. Mater. 2004, 16, 1249.

[6] Huo, F. W.; Zheng, Z. J.; Zheng, G. F.; Giam, L. R.; Zhang, H.; Mirkin, C. A. Science 2008, 321, 1658.

[7] Xu, H.; Ling, X. Y.; van Bennekom, J.; Duan, X.; Ludden, M. J. W.; Reinhoudt, D. N.; Wessling, M.; Lammertink, R. G. H.; Huskens, J. J. Am. Chem. Soc. 2009, 131, 797.

[8] Kraus, T.; Malaquin, L.; Schmid, H.; Riess, W.; Spencer, N. D.; Wolf, H. Nat. Nanotechnol. 2007, 2, 570.

[9] Tekin, E.; Smith, P. J.; Schubert, U. S. Soft Matter 2008, 4, 703.

[10] Zhang, L.; Liu, H. T.; Zhao, Y.; Sun, X. N.; Wen, Y. G.; Guo, Y. L.; Gao, X. K.; Di, C. A.; Yu, G.; Liu, Y. Q. Adv. Mater. 2012, 24, 436.

[11] van den Berg, A. M. J.; de Laat, A. W. M.; Smith, P. J.; Perelaer, J.; Schubert, U. S. J. Mater. Chem. 2007, 17, 677.

[12] van Osch, T. H. J.; Perelaer, J.; de Laat, A. W. M.; Schubert, U. S. Adv. Mater. 2008, 20, 343.

[13] Sele, C. W.; von Werne, T.; Friend, R. H.; Sirringhaus, H. Adv. Mater. 2005, 17, 997.

[14] Noh, Y. Y.; Zhao, N.; Caironi, M.; Sirringhaus, H. Nat. Nanotechnol. 2007, 2, 784.

[15] Cui, L. Y.; Li, Y. F.; Wang, J. X.; Tian, E. T.; Zhang, Y. Z.; Song, Y. L.; Jiang, L. J. Mater. Chem. 2009, 19, 5499.

[16] Li, Z. R.; Wang, J. X.; Zhang, Y. Z.; Wang, J. J.; Jiang, L.; Song, Y. L. Appl. Phys. Lett. 2010, 97, 233107.

[17] Bai, C. L. Chin. Sci. Bull. 2009, 54, 1941. (白春礼, 科学通报, 2009, 54, 1941.)

[18] Zhou, H. H.; Song, Y. L. Adv. Mater. Res. 2011, 174, 447.

[19] Sirringhaus, H.; Kawase, T.; Friend, R. H.; Shimoda, T.; Inbasekaran, M.; Wu, W.; Woo, E. P. Science 2000, 290, 2123.

[20] Wang, J. Z.; Zheng, Z. H.; Li, H. W.; Huck, W. T. S.; Sirringhaus, H. Nat. Mater. 2004, 3, 171.

[21] Lee, K. H.; Kim S. M.; Jeong, H.; Jung, G. Y. Soft Matter 2012, 8, 465.

[22] Hendriks, C. E.; Smith, P. J.; Perelaer, J.; Van den Berg, A. M. J.; Schubert, U. S. Adv. Funct. Mater. 2008, 18, 1031.

[23] Fisslthaler, E.; Blumel, A.; Landfester, K.; Scherf, U.; List, E. J. W. Soft Matter 2008, 4, 2448.

[24] Park, J. U.; Hardy, M.; Kang, S. J.; Barton, K.; Adair, K.; Mukhopadhyay, D. K.; Lee, C. Y.; Strano, M. S.; Alleyne, A. G.; Georgiadis, J. G.; Ferreira, P. M.; Rogers, J. A. Nat. Mater. 2007, 6, 782.

[25] Park, J. U.; Lee, S.; Unarunotai, S.; Sun, Y. G.; Dunham, S.; Song, T.; Ferreira, P. M.; Alleyene, A. G.; Paik, U.; Rogers, J. A. Nano Lett. 2010, 10, 584.

[26] Loh, O.; Lam, R.; Chen, M.; Moldovan, N.; Huang, H. J.; Ho, D.; Espinosa, H. D. Small 2009, 5, 1667.

[27] Lovsky, Y.; Lewis, A.; Sukenik, C.; Grushka, E. Anal. Bioanal. Chem. 2010, 396, 133.

[28] Ferraro, P.; Coppola, S.; Grilli, S.; Paturzo, M.; Vespini, V. Nat. Nanotechnol. 2010, 5, 429.

[29] Ganan-Calvo, A. M.; Gonzalez-Prieto, R.; Riesco-Chueca, P.; Herrada, M. A.; Flores-Mosquera, M. Nat. Phys. 2007, 3, 737.

[30] Deegan, R. D.; Bakajin, O.; Dupont, T. F.; Huber, G.; Nagel, S. R.; Witten, T. A. Nature 1997, 389, 827.

[31] Deegan, R. D. Phys. Rev. E 2000, 61, 475.

[32] Deegan, R. D.; Bakajin, O.; Dupont, T. F.; Huber, G.; Nagel, S. R.; Witten, T. A. Phys. Rev. E 2000, 62, 756.

[33] Hu, H.; Larson, R. G. J. Phys. Chem. B 2006, 110, 7090.

[34] Shen, X.; Ho, C. M.; Wong, T. S. J. Phys. Chem. B 2010, 114, 5269.

[35] Yunker, P. J.; Still, T.; Lohr, M. A.; Yodh, A. G. Nature 2011, 476, 308.

[36] Hodges, C. S.; Ding, Y.; Biggs, S. J. Colloid Interface Sci. 2010, 352, 99.

[37] Still, T.; Yunker, P. J.; Yodh, A. G. Langmuir 2012, 28, 4984.

[38] Bigioni, T. P.; Lin, X. M.; Nguyen, T. T.; Corwin, E. I.; Witten, T. A.; Jaeger, H. M. Nat. Mater. 2006, 5, 265.

[39] Jung, J. Y.; Kim, Y. M.; Yoo, J. Y. Anal. Chem. 2009, 81, 8256.

[40] Bhardwaj, R.; Fang, X. H.; Somasundaran, P.; Attinger, D. Langmuir 2010, 26, 7833.

[41] Soltman, D.; Subramanian, V. Langmuir 2008, 24, 2224.

[42] Harris, D. J.; Hu, H.; Conrad, J. C.; Lewis, J. A. Phys. Rev. Lett. 2007, 98, 148301.

[43] Keseroglu, K.; Culha, M. J. Colloid Interface Sci. 2011, 360, 8.

[44] Park, J.; Moon, J. Langmuir 2006, 22, 3506.

[45] Kim, D.; Jeong, S.; Park, B. K.; Moon, J. Appl. Phys. Lett. 2006, 89, 264101.

[46] Denneulin, A.; Bras, J.; Carcone, F.; Neuman, C.; Blayo, A. Carbon 2011, 49, 2603.

[47] Tekin, E.; de Gans, B. J.; Schubert, U. S. J. Mater. Chem. 2004, 14, 2627.

[48] de Gans, B. J.; Schubert, U. S. Langmuir 2004, 20, 7789.

[49] Ristenpart, W. D.; Kim, P. G.; Domingues, C.; Wan, J.; Stone, H. A. Phys. Rev. Lett. 2007, 99, 234502.Eral, H. B.; Augustine, D. M.; Duits, M. H. G.; Mugele, F. Soft Matter 2011, 7, 4954.

喷墨打印高精度图案研究进展

Research Progress of High-precision Patterns by Directly Inkjet Printing

PDF

可视化

被引次数

摘要/Abstract

引用此文

分享此文

参考文献

相关文章 2

编辑推荐

相关统计

本文评价

[1]	胡立伟, 刘宪虎, 刘春太, 宋延林, 李明珠. 光子晶体结构色材料的自组装制备与应用^★[J]. 化学学报, 2023, 81(7): 809-819.
[2]	朱水洪, 罗文昊, 曾文斌, 林友辉, 刘向阳. 软光刻法制备具有表面微结构的角蛋白膜[J]. 化学学报, 2019, 77(6): 533-538.