SIOC English
化学学报
高级检索

化学学报 ›› 2009, Vol. 67 ›› Issue (7): 587-592. 上一篇    下一篇

研究论文

挂式-四氢双环戊二烯热裂解产物分布研究

苏小辉a,b 侯红梅a 厉 刚a 林瑞森*,a 蔡尚立a

  

  1. (a浙江大学化学系 杭州 310027)
    (b广州工业大学轻工化工学院 广州 510006)

  • 投稿日期:2008-09-12 修回日期:2008-11-04 发布日期:2009-04-14
  • 通讯作者: 林瑞森

Product Distribution of Thermal Cracking of exo-Tetrahydrodicyclopentadiene

Su, Xiaohui a,b Hou, Hongmei a Li, Gang a Lin, Ruisen *,a Cai, Shangli a   

  1. (a Department of Chemistry, Zhejiang University, Hangzhou 310027)
    (b Faculty of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510006)
  • Received:2008-09-12 Revised:2008-11-04 Published:2009-04-14

PDF

1505

被引次数

9 | 1

研究了常压下, 温度为450～650 ℃, 停留时间为15.44～4.03 s条件下的JP-10 (挂式-四氢双环戊二烯)热裂解产物分布. 在相对较长的停留时间下, JP-10热裂解转化率对温度很敏感. 热裂解主要产物为甲烷、乙烯、丙烯、丁烯、丁二烯、环戊二烯、苯、甲苯、苯乙烯、环戊烯的乙烯基取代物及C5, C6异构体(戊二烯、环戊烯的甲基取代物、环己烯、己二烯和环戊二烯甲基取代物), 其中, C1～C4、环戊二烯、苯、甲苯、乙烯基取代环戊烯为初始产物.

关键词: 热裂解, 挂式-四氢双环戊二烯, 停留时间

Thermal cracking of JP-10 (exo-tetrahydrodicyclopentadiene) was investigated in an annular tubular reactor at atmospheric pressure, in the temperature range of 450～650 ℃ and space time range of 15.44～4.03 s. In a longer space time, the conversion of thermal decomposition of JP-10 was very sensitive to temperature. The major products were methane, ethylene, propylene, butylene, butadiene, cyclopentadiene, benzene, toluene, styrene, vinyl-substituted cyclopentene derivatives and C5/C6 isomers (pentadiene, methyl-substituted cyclopentene derivatives, cyclohexene, hexadiene and methyl-substituted cyclopentadiene derivatives), and the main primary products were determined to be C1～C4 compounds, cyclopentadiene, benzene, toluene and vinyl-substituted cyclopentene derivatives.

Key words: thermal cracking, exo-tetrahydrodicyclopentadiene, space time