SIOC English
化学学报
高级检索

化学学报 ›› 2010, Vol. 68 ›› Issue (12): 1153-1160.    下一篇

研究论文

阵列微电极研究Nd3＋对金属铜在3.5% NaCl溶液中腐蚀电化学行为的影响

林海1，盛敏奇1，钟庆东*,1,2，周琼宇1，王毅1,2，钮晓博2   

  1. (1上海大学上海市现代冶金与材料制备重点实验室 上海 200072)
    (2上海电力学院能源与环境工程学院 上海 200090)
  • 投稿日期:2009-11-06 修回日期:2009-12-24 发布日期:2010-02-24
  • 通讯作者: 钟庆东 E-mail:qdzhong@shu.edu.cn
  • 基金资助:

    国家自然科学基金 (Nos. 50571059，50615024)；教育部新世纪优秀人才支持计划 (No. NCET-07-0536)；教育部创新团队计划 (No. IRT0739)资助项目.

Effect of Nd3＋ on Corrosion Electrochemical Behavior of Copper in 3.5% NaCl Solution by Using Microelectrode Array

Lin Hai1 Sheng Minqi1 Zhong Qingdong*,1,2 Zhou Qiongyu1 Wang Yi1,2 Niu Xiaobo2   

  1. (1 Key Laboratory of Modern Metallurgy and Material Processing, Shanghai University, Shanghai 200072)
    (2Key Laboratory of State Power Corporation of China, Department of Environmental Engineering, Shanghai University of Electric Power, Shanghai 200090)
  • Received:2009-11-06 Revised:2009-12-24 Published:2010-02-24

PDF

1278

利用阵列微电极技术测量了金属铜的自腐蚀电位、阻抗及表面腐蚀产物膜层载流子密度, 并结合扫描电子显微镜, 研究了Nd3＋对金属铜在3.5% (w) NaCl溶液中腐蚀电化学行为的影响. 结果表明, 加入Nd3＋使得金属铜表面生成的腐蚀产物膜层的形貌及结构发生了变化, 腐蚀产物膜层变薄, 腐蚀产物由片状结构转变为粒状结构, 颗粒均匀分散分布; Nd3＋的存在使得金属铜表面各区域的电位方差由0.034下降为0.026, 阻抗标准方差由32805下降为6940, 电位及阻抗分布趋于均匀化, 有利于抑制局部腐蚀的发生; 并且加入Nd3＋将造成金属铜表面绝大部分区域腐蚀产物膜层的半导体类型由n型转变为p型, 表面腐蚀产物膜层载流子密度标准方差由1.89×1017上升为4.10×1017, 载流子密度分布趋于不均匀.

关键词: 阵列微电极, 金属铜, Nd3＋, 电化学阻抗, Mott-Schottky分析

The effect of Nd3＋ on corrosion electrochemical behavior of copper in 3.5% (w) NaCl solution was analyzed by microelectrode array and scanning electron microscopy. The corrosion potential distribution, the impedance distribution and the carrier density distribution of corrosion product film on surface of copper were investigated. The results show that with the addition of Nd3＋, morphology and structure of corrosion product film were changed, the film became thin, the structure of corrosion product was changed from sheet structure to granular structure and corrosion product particles were well dispersed. The presence of Nd3＋ led the variance of corrosion potential decreased from 0.034 to 0.026 and the variance of impedance decreased from 32805 to 6940. The corrosion potential and impedance distribution tended to homogenization, which indicates that Nd3＋ could restrain the localized corrosion. The type of semiconductor of corrosion product film on the mostly surface of copper was changed from n-type to p-type with the addition of Nd3＋. At the same time, the variance of carrier density of corrosion product film increased from 1.89×1017 to 4.10×1017, the carrier density of corrosion product film on surface of copper tended to inhomogeneous when Nd3＋ was added.

Key words: microelectrode array, copper, Nd3＋, electrochemical impedance spectroscopy, Mott-Schottky analysis