化学学报 ›› 2022, Vol. 80 ›› Issue (9): 1289-1298.DOI: 10.6023/A22040162 上一篇    下一篇

研究论文

载体相变下Pt-TiO2 SMSI研究及其对CO催化性能的影响

贾亚辉a, 李春生a, 徐忠震a, 刘伟b,*(), 高道伟a, 陈国柱a,*()   

  1. a 济南大学化学化工学院 济南 255022
    b 济南大学水利与环境学院 济南 250002
  • 投稿日期:2022-04-08 发布日期:2022-06-13
  • 通讯作者: 刘伟, 陈国柱
  • 基金资助:
    国家自然科学基金(21878121); 山东省自然科学基金(ZR202102230042)

The SMSI of Pt-TiO2 During the Crystalline Phase Transformation and Its Effect on CO Oxidation Performance

Yahui Jiaa, Chunsheng Lia, Zhongzhen Xua, Wei Liub(), Daowei Gaoa, Guozhu Chena()   

  1. a School of Chemistry and Chemical Engineering, University of Jinan, Jinan 255022, China
    b School of Water Conservancy and Environment, University of Jinan, Jinan 250002, China
  • Received:2022-04-08 Published:2022-06-13
  • Contact: Wei Liu, Guozhu Chen
  • Supported by:
    National Natural Science Foundation of China(21878121); Shandong Provincial Natural Science Foundation(ZR202102230042)

金属-载体强相互作用(SMSI)是多相催化中的一个重要概念, 对负载金属催化剂的稳定性和活性均有重要影响. 目前尽管有关Pt-TiO2体系的SMSI已有阐述, 但主要围绕载体的结构敏感性(晶面效应)、贵金属的粒径尺寸(尺寸效应)对SMSI的影响进行研究, 而TiO2的晶型对SMSI的形成是否存在影响目前尚未报道. 在本工作中, 选择青铜矿TiO2(B)为载体, 通过浸渍法负载Pt得到Pt-TiO2(B)催化剂, 并在H2、H2-O2氛围对其进行热处理. 研究结果表明, 500 ℃ 高温下H2处理不仅导致催化剂中载体由青铜矿变为锐钛矿, 而且引起载体迁移至Pt颗粒表面形成几何包覆. 当此催化剂再次经400 ℃ O2处理, Pt颗粒表面的包覆层消失, 呈现典型的SMSI行为. 借助高分辨透射电子显微镜(HRTEM)以及CO漫反射傅立叶变换红外光谱(CO-DRIFTS)结果分析, TiO2的晶型转变对SMSI的形成具有重要影响. 此外, 对不同气氛、温度下处理的Pt-TiO2进行了催化CO氧化性能研究, 结果证明SMSI产生的几何包覆以及载体的氧缺陷对催化CO氧化性能提升发挥了重要作用. 显然, 该工作丰富了Pt-TiO2体系的SMSI研究, 为其它载体晶相转变(或物相转变)可能诱导SMSI产生提供了参考意义.

关键词: 金属-载体强相互作用, 青铜矿, 晶相转变, 几何包覆, CO氧化

The strong metal-support interaction (SMSI) has long been studied in heterogonous catalysis on account of its importance in stabilizing active metals and tuning catalytic performance. So far, although there are many reports about SMSI in Pt-TiO2 system, they are mainly focusing on support structure sensitivity (crystal plane effect) and the size of supported noble metals (size effect), it is still unclear whether the TiO2 crystalline phase influences the creation of SMSI or not. In this study, we choose brookite TiO2 (TiO2(B)) as support to prepare Pt-TiO2(B) catalyst by means of traditional impregnation method. Then the as-prepared Ptimp/TiO2(B) was treated at different temperature under different atmosphere, specifically, 250 ℃ heat treatment under H2 (the sample is labeled as Ptimp/TiO2(B)-H250), 500 ℃ heat treatment under H2 (the sample is labeled as Ptimp/TiO2(B)-H500), and 400 ℃ heat treatment under O2 followed by H2 treatment at 500 ℃ (the sample is labeled as Ptimp/TiO2(B)-H500+O400). The experimental results show that the 500 ℃ heat treatment under H2 atmosphere induces the crystalline phase transformation of TiO2(B) into anatase, and more importantly, this transformation leads to the TiO2-x migration as a result of the encapsulation of Pt particles by TiO2-x. After further heat treatment at 400 ℃ under O2 atmosphere, the TiO2-x shell coated on the Pt nanoparticle surfaces was removed, which displays a classical SMSI behavior. According to the high resolution transmission electron microscope (HRTEM) and CO diffuse reflectance infrared Fourier transform spectroscopy (CO-DRIFTS) results, we proposed that the crystalline phase transformation plays a great role in the creation of SMSI. In addition, we selected CO oxidation as a model reaction to compare the catalytic activity of Ptimp/TiO2(B) catalysts. The results demonstrate that the activity of the catalysts is simultaneously affected by the TiO2-x coating on Pt nanoparticles and the oxygen vacancy concentration within the support. More specifically, compared with TiO2(B), anatase TiO2 has abundant oxygen vacancies, which is of great importance to activate O2. In the case of Ptimp/TiO2(B)-H500+O400 catalyst, the active sites of Pt nanoparticles are exposed due to the removal of TiO2-x coating, and the anatase TiO2 has a certain amount of oxygen vacancies. Therefore, Ptimp/TiO2(B)-H500+O400 catalyst exhibits the best activity among all compared Pt/TiO2(B) catalyst. Obviously, this work greatly enriches the SMSI for Pt/TiO2 system, and provides an important reference value for the creation of SMSI, if any, when other crystalline phase transformation (or phase transformation) involved supports are suitably chosen.

Key words: strong metal-support interaction, TiO2(B), phase change, physical coating, CO oxidation