SIOC English
化学学报
高级检索

化学学报 ›› 2006, Vol. 64 ›› Issue (24): 2509-2514. 上一篇    

研究简报

新型含氟聚苯撑乙烯的合成及电致发光性能

李盛彪1,2,3, 张晔1,2, 牛巧莉4, 赵雷1, 范曲立1,2, 彭波1, 朱旭辉4, 曹镛4, 黄维*,1,2   

  1. (1 Institute of Advanced Materials, Fudan University, Shanghai 200433)
    (2 Institute of Advanced Materials, Nanjing University of Posts and Telecommunica-tions, Nanjing 210003)
    (3 College of Chemistry, Huazhong Normal University, Wuhan 430079)
    (4 Institute of Polymer Optoelectronics Materials & Devices, South China University of Technology, Guangzhou 510640)
  • 投稿日期:2006-03-28 修回日期:2006-06-06 发布日期:2006-12-28
  • 通讯作者: 黄维

Synthesis and Electroluminescence Performance of Novel Fluo-rine-containing PPV Derivates

LI Sheng-Biao1,2,3; ZHANG Ye1,2; NIU Qiao-Li4; ZHAO Lei1; FAN Qu-Li1,2; PENG Bo1; ZHU Xu-Hui4; CAO Yong4; HUANG Wei*,1

  1. 复旦大学先进材料研究院
  • Received:2006-03-28 Revised:2006-06-06 Published:2006-12-28
  • Contact: HUANG Wei

PDF

944

被引次数

14 | 8

设计并合成了两个不同烷氧基增溶的结构新颖的含氟聚苯撑乙烯Pa, Pb和共聚物Pc. 通过核磁共振和元素分析对其结构进行了表征, 通过热重分析、凝胶色谱测定了其热分解温度和分子量及分布; 紫外-可见吸收光谱仪和荧光分光光度计测得其吸收-发射光谱. 测量发现热失重曲线拐点温度超过400 ℃. 由2-乙基己基增溶的Pa和Pc具有优异的溶解性, 固态荧光发射波长分别为499和585 nm, 相应比PPV和MEH-PPV稍有蓝移. 应用旋转涂膜的方法制作Pa和Pc的双层器件(ITO/PEDOT/Polymer/Ba/Al), 电致发光波长分别为494和604 nm, 器件均具有较低的启动电压(4 V左右), 分别在24和15 V时达到最大亮度598和203 cd•m－2, 而此时电流密度分别为100和80 mA•cm－2.

关键词: 聚苯撑乙烯, 共轭聚合物, 氟, 合成, 有机电致发光器件

Synthesis and electroluminescence performance of three novel poly(phenylene vinylene) (PPV) derivates containing electron withdrawing fluorine atom and twisted terphenyl were reported. The structures of the polymers were characterized and determined by 1H NMR, 13C NMR and elemental analysis. Due to fluorine atom and terphenyl structure, these polymers are thermally stable with decomposition temperature of about 400 ℃. The peaks of the solid-state photoluminescence (PL) of Pa and Pc are 499 and 585 nm, respectively. They were blue-shifted compared to those of PPV and MEH-PPV, respectively, which was attributed to their twisted terphenyl structure. The double-layer devices (ITO/PEDOT/Polymer/Ba/Al) were fabricated. They held low onset voltage (about 4 V). The peaks of electroluminescence (EL) were 494 and 604 nm, and then their maximum brightness values were 598 cd•m－2 (24 V, 100 mA•cm－2) and 203 cd•m－2 (15 V, 80 mA•cm－2), respectively. These resulting polymers are promising materials for OLED.

Key words: poly(p-phenylene vinylene), conjugated polymer, fluorine, synthesis, organic light-emitting device