SIOC English
化学学报
高级检索

化学学报 ›› 2008, Vol. 66 ›› Issue (19): 2113-2116. 上一篇    下一篇

研究论文

介孔SBA-15中有机模板剂的紫外/臭氧法脱除

解丽丽 李庆华* 袁 昊 王利军 田 震 邴乃慈

  

  1. (上海第二工业大学城市建设与环境工程学院 上海 201209)

  • 投稿日期:2007-12-26 修回日期:2008-04-17 发布日期:2008-10-14
  • 通讯作者: 李庆华

UV/ozone Treatment on the Removal of the Organic Template from Mesoporous SBA-15

XIE, Li-Li LI, Qing-Hua* YUAN, Hao WANG, Li-Jun
TIAN, Zhen BING, Nai-Ci
  

  1. (School of Urban Development and Environmental Engineering, Shanghai Second Polytechnic University, Shanghai 201209)
  • Received:2007-12-26 Revised:2008-04-17 Published:2008-10-14
  • Contact: LI, Qing-Hua

PDF

1883

被引次数

17

紫外/臭氧法用于脱除有序介孔材料SBA-15中有机模板剂. 该方法是一种非加热光化学降解法, 简单、易操作, 可在温和条件下彻底除去SBA-15中三嵌段共聚物有机模板剂P123. 通过XRD, TEM, FT-IR和BET等对SBA-15经不同方法脱除模板剂前后的详细表征, 表明紫外/臭氧法在彻底脱除SBA-15中有机模板剂后, 保留了很好的骨架有序性, 比表面积更大, 孔道更加开放, 克服了高温焙烧脱除模板剂造成的孔道收缩.

关键词: 介孔SBA-15, 紫外/臭氧法, 有机模板剂

UV/ozone treatment was applied to remove the organic template within mesoporous SBA-15. This method is a non-thermal photochemical treatment, which is simple to operate and can easily eliminate the triblock copolymer Pluronic P123 from SBA-15. The as-synthesized, UV/ozone treated and calcined SBA-15 samples were characterized thoroughly by XRD, TEM, FT-IR and BET. The results showed that the UV/ozone treatment was an effective method to remove the template from pores of SBA-15 completely under mild conditions, and the final product maintained highly ordered frameworks, higher surface areas and larger pore openness, avoiding the structure contraction by high thermal calcinations.

Key words: mesoporous SBA-15, UV/ozone treatment, organic template