SIOC English
化学学报
高级检索

化学学报 >

2013 , Vol. 71 >Issue 04: 579 - 584

DOI: https://doi.org/10.6023/A12110927

研究论文

三维多孔石墨烯/铂钯双金属杂化体作为高性能的甲醇氧化电催化剂

  • 孙红梅 ,
  • 曹林园 ,
  • 逯乐慧
展开
  • a 中国科学院长春应用化学研究所 电分析化学国家重点实验室 长春 130022;
    b 中国科学院大学 北京 100039

收稿日期: 2012-11-15

  网络出版日期: 2013-03-01

基金资助

项目受国家基础研究973 (No. 2010CB933600)资助.

收起

Three Dimensional Porous Graphene/PtPd Bimetallic Hybrids as High-performance Electrocatalyst for Methanol Oxidation

  • Sun Hongmei ,
  • Cao Linyuan ,
  • Lu Lehui
Expand
  • a State Key Laboratory of Electroanalytical Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022;
    b Graduate University of the Chinese Academy of Sciences, Beijing 100039

Received date: 2012-11-15

  Online published: 2013-03-01

Supported by

Project supported by the National Basic Research Program of China (973 Program; No. 2010CB933600).

Fold

摘要

通过简便的溶剂热还原方法以及冰模板自组装技术, 成功构建了三维多孔石墨烯/铂钯双金属杂化体. 三维多孔的结构以及可调的组成成分赋予这种杂化体大的比表面积和高的催化活性, 使其展现了较高的催化甲醇氧化的能力, 为构筑新型高效的甲醇燃料电池催化剂提供了一个新的平台.

关键词： 石墨烯; 双金属; 燃料电池; 冰模板; 溶剂热

本文引用格式

孙红梅 , 曹林园 , 逯乐慧 . 三维多孔石墨烯/铂钯双金属杂化体作为高性能的甲醇氧化电催化剂[J]. 化学学报, 2013 , 71(04) : 579 -584 . DOI: 10.6023/A12110927

Abstract

The development of fuel cells is highly dependent on the exploration of the efficient electrocatalyst. However, up to now, constructing high-quality hybrids with large electrochemical surface area (ECSA) through a facile method has remained a great challenge. In this paper, a novel approach for producing three dimensional porous graphene/PtPd bimetallic hybrids was developed by combining the solvothermal strategy with the ice template technique. First, a simple solvothermal route were employed for preparing PtPd bimetallic nanoparticle supported on graphene (PPG) hybrids by simultaneously forming bimetallic nanoparticles and reducing graphene oxide (GO). Then, three dimensional porous graphene/PtPd bimetallic hybrids are obtained via the ice templation of an aqueous suspension comprised of the PPG and phthalic acid diethylene glycol diacrylate (PDDA). The as-prepared 3D PPG were characterized by transmission electron microscopy (TEM), high-resolution TEM (HRTEM), X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and electrochemical technique. It is interesting to find that the loading of PtPd bimetallic nanoparticles on the surface of graphene could be controlled by simply changing the initial weight ratio of the precursors. Furthermore, the hydrophilicability of PDDA plays an important role on the fabrication of 3D porous graphene/PtPd bimetallic hybrids. Most importantly, this special morphology endows the 3D PPG hybrids with larger ECSA and more catalytic sites compared with the PPG and commercial E-TEK Pt/C catalysts, and thus leads to much higher catalytic activity towards methanol oxidation reaction. The details are shown as follows. (a) The ECSA value of the as-prepared 3D PPG hybrids is tested to be 98.7 m2穏-1, while the ECSA values of PPG and E-TEK Pt/C catalysts are tested to be 61.3 and 46.5 m2穏-1, respectively. (b) The mass current density for methanol oxidation in 3D PPG hybrids is higher than those of PPG and E-TEK Pt/C catalysts and the corresponding potential on 3D PPG hybrids is much lower than that on PPG and E-TEK Pt/C catalysts at a given oxidation current density. (c) The as-prepared 3D PPG hybrids catalyst exhibits greater poisoning tolerance than the PPG and E-TEK Pt/C catalysts during methanol oxidation. All results reveal that these 3D PPG hybrids can provide a new and versatile platform for the development of high-performance electrocatalyst for methanol oxidation.

Key words： graphene; bimetal; fuel cell; ice template; solvothermal

参考文献

[1] Formo, E.; Lee, E.; CampbelL, D.; Xia, Y. N. Nano Lett. 2008, 8, 668.

[2] Sun, S. H.; Jaouen, F.; Dodelet, J. P. Adv. Mater. 2008, 20, 3900.

[3] Liang, H. P.; Zhang, H. M.; Hu, J. S.; Guo, Y. G.; Wan, L. J.; Bai, C. L. Angew. Chem., Int. Ed. 2004, 43, 1540.

[4] Wang, C.; Daimon, H.; Lee, Y.; Kim, J.; Sun, S. J. Am. Chem. Soc. 2007, 129, 6974.

[5] Tian, N.; Zhou, Z. Y.; Sun, S. G.; Ding, Y.; Wang, Z. L. Science 2007, 316, 732.

[6] Yamauchi, Y.; Sugiyama, A.; Morimoto, R.; Takai, A.; Kuroda, K. Angew. Chem., Int. Ed. 2008, 47, 5371.

[7] Yamauchi, Y.; Takai, A.; Nagaura, T.; Inoue, S.; Kuroda, K. J. Am. Chem. Soc. 2008, 130, 5426.

[8] Wang, L.; Yamauchi, Y. J. Am. Chem. Soc. 2009, 131, 9152.

[9] Li, Y.; Gao, W.; Ci, L.; Wang, C.; Ajayan, P. M. Carbon 2010, 48, 1124.

[10] Huang, X.; Li, S. Z.; Huang, Y. Z.; Wu, S. X.; Zhou, X. Z.; Li, S. Z.; Gan, C. L.; Boey, F.; Mirkin, C. A.; Zhang, H. Nat. Commun. 2011, 2, 292.

[11] Kou, R.; Shao, Y.; Wang, D.; Engelhard, M. H.; Kwak, J. H.; Wang, J.; Viswanathan, V. V.; Wang, C.; Lin, Y.; Wang, Y.; Aksay, I. A.; Liu, J. Electrochem. Commun. 2009, 11, 954.

[12] Lu, J.; Do, I.; Drzal, L. T.; Worden, R. M.; Lee, I. ACS Nano 2008, 2, 1825.

[13] Guo, S.; Dong, S.; Wang, E. ACS Nano 2010, 4, 547.

[14] Tang, L. H.; Wang, Y.; Li, Y. M.; Feng, H. B.; Lu, J.; Li, J. H. Adv. Funct. Mater. 2009, 19, 2782.

[15] Zhou, M.; Zhai, Y. M.; Dong, S. J. Anal. Chem. 2009, 81, 5603.

[16] Bai, H.; Xu, Y.; Zhao, L.; Li, C.; Shi, G. Q. Chem. Commun. 2009, 1667.

[17] Jasuja, K.; Berry, V. ACS Nano 2009, 3, 2358.

[18] Guo, S. J.; Fang, Y. X.; Dong, S. J.; Wang, E. K. J. Phys. Chem. C 2007, 111, 17104.

[19] Guo, S. J.; Wang, L.; Dong, S. J.; Wang, E. K. J. Phys. Chem. C 2008, 112, 13510.

[20] Wang, S. Y.; Kristian, N.; Jiang, S. P.; Wang, X. Nanotechnology 2009, 20, 025605.

[21] Wang, S. Y.; Wang, X.; Jiang, S. P. Langmuir 2008, 24, 10505.

[22] Zhu, M. S.; Chen, P. L.; Liu, M. H. ACS Nano 2011, 5, 4529.

[23] Yoo, E.; Okata, T.; Akita, T.; Kohyyama, M.; Nakamura, J.; Honma, I. Nano Lett. 2009, 9, 2255.

[24] Estevez, L.; Kelarakis, A.; Gong, Q. M.; Da’as, E. H.; Giannelis, E. P. J. Am. Chem. Soc. 2011, 133, 6122.

[25] Deng, H.; Li, X.; Peng, Q.; Wang, X.; Chen, J.; Li, Y. Angew. Chem., Int. Ed. 2005, 44, 2782.

[26] Zheng, S. F.; Hu, J. S.; Zhong, L. S.; Wan, L. J.; Song, W. G. J. Phys. Chem. C 2007, 111, 11174.

[27] Wang, S. Y.; Jiang, S. P.; White, T. J.; Guo, J.; Wang, X. Adv. Funct. Mater. 2009, 19, 378.

[28] Stankovich, S.; Dikin, D. A.; Piner, R. D.; Kohlhaas, K. A.; Kleinhammes, A.; Jia, Y.; Wu, Y.; Nguyen, S. T.; Ruoff, R. S. Carbon 2007, 45, 1558.

[29] Sun, S. H.; Yang, D. Q.; Villers, D.; Zhang, G. X.; Sacher, E.; Dodelet, J. P. Adv. Mater. 2008, 20, 571.

[30] Casado-Rivera, E.; Volpe, D. L.; Alden, L.; Lind, C.; Downie, C.; Vazquez-Alvarez, T.; Angelo, A. C. D.; Disalvo, F. J.; Abruna, H. D. J. Am. Chem. Soc. 2004, 126, 4043.

[31] Mu, Y, Y.; Liang, H. P.; Hu, J.; Hu, J. S.; Jiang, L.; Wan, L. J. J. Phys. Chem. B 2005, 109, 22212.

[32] Zhang, H.; Yin, Y. J.; Hu, Y. J.; Li, C. Y.; Wu, P.; Wei, S. H.; Cai, C. X. J. Phys. Chem. C 2010, 114, 11861.

[33] Teng, X.; Liang, X.; Rahman, S.; Yang, H. Adv. Mater. 2005, 17, 2237.

[34] Lin, Z. H.; Lin, M. H.; Chang, H. T. Chem. Eur. J. 2009, 15, 4656.

[35] Hummers, W. S.; Offeman, R. E. J. Am. Chem. Soc. 1958, 80, 1339.
Options
文章导航

/

〈 〉