在多元醇体系中一锅法合成具有良好储锂性能的介孔碳-锡复合材料
收稿日期: 2014-10-08
网络出版日期: 2015-01-29
基金资助
项目受江苏省产学研前瞻性研究(No. BY2013001-01)、江苏省自然科学基金(No. BK20130900)、江苏省高校自然科学基金(No. 13KJB150026)、南京师范大学高层次人才启动基金(No. 2013103XGQ0008)和江苏高校优势学科建设工程项目资助.
One-pot Synthesis of Sn/Mesoporous Carbon Composite in a Polyol System with Well-improved Lithium Storage Capability
Received date: 2014-10-08
Online published: 2015-01-29
Supported by
Project Supported by the Industry-Academia Cooperation Innovation Fund Project of Jiangsu Province (No. BY2013001–01), Natural Science Foundation of Jiangsu Province (No. BK20130900), Natural Science Foundation of Jiangsu Higher Education Institutions of China (No. 13KJB150026), Priming Scientific Research Foundation for Advanced Talents in Nanjing Normal University (No. 2013103XGQ0008) and the Program Development of Jiangsu Higher Education Institutions.
以介孔碳(MC)为导电和支撑介质, 在多元醇体系中通过简便的化学还原方法制备纳米结构的介孔碳-锡(MC-Sn)复合材料. 采用扫描电子显微镜(SEM)、高分辨透射电子显微镜(HRTEM)和恒电流充放电实验对所得产物的形貌、结构及电化学性能进行表征. 结果表明, 大量的Sn纳米颗粒均匀且致密地附着在介孔碳上. 作为锂离子电池负极材料, MC-Sn复合物表现出了较好的循环性能和倍率性能. 例如, 在100 mA•g-1的充放电速率下循环40圈, 其放电比容量保持在721.5 mAh•g-1; 当充放电速率增大到1 A•g-1时, 其放电比容量仍高达265.8 mAh•g-1. 简单的制备方法和优越的储锂性能,使得MC-Sn复合材料成为一种理想的高性能锂离子电池负极材料.
叶亚 , 朱婧怡 , 姚依男 , 王雨果 , 吴平 , 唐亚文 , 周益明 , 陆天虹 . 在多元醇体系中一锅法合成具有良好储锂性能的介孔碳-锡复合材料[J]. 化学学报, 2015 , 73(2) : 151 -155 . DOI: 10.6023/A14100691
By introducing three-dimensional mesoporous carbon (MC) as a conducting and buffering matrix, MC-Sn composite has been synthesized through a facile chemical reduction approach in a polyol system at the temperature of 170 ℃ which is protected by nitrogen atmosphere. Pure Sn nanoparticles were synthesized through the same methodology, but without the addition of MC. The morphology, structure and electrochemical performance of the products have been characterized by scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), and constant current discharge/charge tests. It is indicated that numerous Sn nanoparticles have been uniformly and densely decorated on the MC matrix. When evaluated as an anode material for lithium-ion batteries (LIBs), the as-prepared MC-Sn composite exhibits markedly improved cycling stability and rate capability compared to pure Sn nanoparticles. For example, a high discharge capacity of 721.5 mAh•g-1 can be retained after 40 discharge/charge cycles at a current density of 100 mA•g-1 in the potential range of 0.01～2 V. When tested under the same condition, pure Sn nanoparticles remain only 361.7 mAh•g-1. The rate capability of MC-Sn composite was examined in comparison with pure Sn nanoparticles at various current densities from 100 to 200, 500 and 1000 mA•g-1. The MC-Sn composite delivers a discharge capacity of 760.5 mAh•g-1 at a current density of 100 mA•g-1 after 10 cycles. This value decreases to 555.6 mAh•g-1 (200 mA•g-1), 366.2 mAh•g-1 (500 mA• g-1), 265.8 mAh•g-1 (1000 mA•g-1), and finally returns to 684.3 mAh•g-1 at 100 mA•g-1. In sharp contrast, the discharge capacities of pure Sn nanoparticles decrease rapidly with the increase of current densities. These results demonstrate that the MC-Sn composite possesses markedly improved rate capability, making it a promising anode for LIBs with high power densities.
[1] Xu, Y.; Guo, J.; Wang, C. J. Mater. Chem. 2012, 22, 9562.
[2] Wang, C.; Li, Y.; Chui, Y. S.; Wu, Q. H.; Chen, X.; Zhang, W. Nanoscale 2013, 5, 10599.
[3] Uysal, M.; Cetinkaya, T.; Alp, A.; Akbulut, H. Appl. Surf. Sci. 2014, 290, 6.
[4] Derrien, G.; Hassoun, J.; Panero, S.; Scrosait, B. Adv. Mater. 2007, 19, 2336.
[5] Zhang, W. M.; Hu, J. S.; Guo, Y. G.; Zheng, S. F.; Zhong, L. S.; Song, W. G.; Wan, L. Adv. Mater. 2008, 20, 1160.
[6] Li, N.; Song, H.; Cui, H.; Wang, C. Nano Energy 2014, 3, 102.
[7] Wu, P.; Du, N.; Liu, J.; Zhang, H.; Yu, J.; Yang, D. R. Mater. Res. Bull. 2011, 46, 2278.
[8] Liu, X.; Xie, J. Y.; Zhao, H. L.; Wang, K.; Tang, W. P.; Pan, Y. L.; Feng, Z. H.; Lv, P. P. Acta Chim. Sinica 2013, 71, 1011. (刘欣, 解晶莹, 赵海雷, 王可, 汤卫平, 潘延林, 丰震河, 吕鹏鹏, 化学学报, 2013, 71, 1011.)
[9] Feng, R.; Wang, L. W.; Lv, Z. Y.; Wu, Q.; Yang, L. J.; Wang, X. Z.; Hu, Z. Acta Chim. Sinica 2014, 72, 653. (冯瑞, 王立伟, 吕之阳, 吴强, 杨立军, 王喜章, 胡征, 化学学报, 2014, 72, 653.)
[10] Dai, L. Q.; Wu, F.; Guan, Y. B.; Fu, K.; Jin, Y.; Gao, W.; Wang, Z.; Su, Y. F. Acta Chim. Sinica 2014, 72, 583. (戴丽琴, 吴锋, 官亦标, 傅凯, 金翼, 高伟, 王昭, 苏岳锋, 化学学报, 2014, 72, 583.)
[11] Chen, J.; Yang, L.; Fang, S.; Zhang, Z.; Deb, A.; Hirano, S. I. Electrochim. Acta 2014, 127, 390.
[12] Hassoun, J.; Derrien, G.; Panero, S.; Scrosait, B. Adv. Mater. 2008, 20, 3169.
[13] Yu, Y.; Gu, L.; Wang, C.; Dhanabalan, A.; Aken, P. A.; Maier, J. Angew. Chem. Int. Ed. 2009, 48, 6485.
[14] Wang, J.; Li, D.; Fan, X.; Gou, L.; Wang, J.; Li, Y.; Lu, X.; Li, Q. J. Alloys Compd. 2012, 516, 33.
[15] Zhu, Z.; Wang, S.; Du, J.; Jin, Q.; Zhang, T.; Chen, J. Nano Lett. 2014, 14, 153.
[16] Seo, S. D.; Lee, G. H.; Lim, A. H.; Min, K. M.; Kim, J. C.; Shim, H. Y.; Park, K. S.; Kim, D. W. RSC Adv. 2012, 2, 3315.
[17] Wang, G.; Wang, B.; Wang, X.; Park, J.; Dou, S.; Ahn, H.; Kim, K. J. Mater. Chem. 2009, 19, 8378.
[18] Wang, D.; Li, X.; Yang, J.; Wang, J.; Geng, D.; Li, R.; Cai, M.; Sham, T. K.; Sun, X. Phys. Chem. Chem. Phys. 2013, 15, 3535.
[19] Li, J.; Wu, P.; Lou, F.; Zhang, P.; Tang, Y.; Zhou, Y.; Lu, T. Electrochim. Acta 2013, 111, 862.
[20] Shen, L.; Zhang, X.; Uchaker, E.; Yuan, C.; Cao, G. Adv. Energy Mater. 2012, 2, 691.
[21] Chen, L.; Wu, P.; Xie, K.; Li, J.; Xu, B.; Cao, G.; Chen, Y.; Tang, Y.; Zhou, Y.; Lu, T.; Yang, Y. Electrochim. Acta 2013, 92, 433.
[22] Xu, B.; Peng, L.; Wang, G.; Cao, G.; Wu, F. Carbon 2010, 48, 2377.
[23] Xu, B.; Shi, L.; Guo, X.; Peng, L.; Wang, Z.; Chen, S.; Cao, G.; Wu, F.; Yang, Y. Electrochim. Acta 2011, 56, 6464.
/
| 〈 |
|
〉 |
