Acta Chimica Sinica ›› 2004, Vol. 62 ›› Issue (23): 2287-2291.     Next Articles

SrCe0.9Yb0.1O3-α陶瓷的导电性

王洪涛1, 马桂林1, 仇立干2   

  1. 1. 苏州大学化学化工学院, 苏州, 215006;
    2. 盐城师范学院化学系, 盐城, 224002
  • 投稿日期:2004-06-17 修回日期:2004-09-25 发布日期:2014-02-17
  • 通讯作者: 马桂林,E-mail:uumagl@sina.com E-mail:uumagl@sina.com
  • 基金资助:
    国家自然科学基金(No.20171034)资助项目.

Electrical Conductivity of SrCe0.9Yb0.1O3-α Ceramic

WANG Hong-Tao1, MA Gui-Lin1, QIU Li-Gan2   

  1. 1. School of Chemistry and Chemical Engineering, Suzhou University, Suzhou 215006;
    2. Department of Chemistry, Yancheng Teacher’s College, Yancheng 224002
  • Received:2004-06-17 Revised:2004-09-25 Published:2014-02-17

Proton-conducting SrCe0.9Yb0.1O3-α ceramic was prepared by high-temperature solid state reaction.X-ray powder diffraction pattern shows that the ceramic is of a single orthorhombic phase of perovskite-type SrCeO3.Using the ceramic as solid electrolyte and porous platinum as electrodes, the measurements of conductivities and ionic transport numbers on SrCe0.9Yb0.1O3-α ceramic were performed by using ac impedence spectroscopy and gas concentration cell methods in the temperature range of 600~1000℃ in dry air and wet hydrogen, respectively.The results indicate that the sample is a mixed conductor of oxide-ion and hole with the maximal conductivity of 0.026 S·cm-1 and the oxide-ionic transport numbers of 0.03~0.2 in dry air.In wet hydrogen atmosphere, the sample has the maximal conductivity of 0.015 S·cm-1.The protonic transport number is unity and the sample is a pure protonic conductor from 600 to 800℃.But in the temperature range of 900~1000℃, the sample exhibited a mixed conduction of proton and electron with the protonic transport numbers of 0.91~0.97.

Key words: perovskite-type oxide, gas concentration cell, impedance spectroscopy, proton conductor