Acta Chimica Sinica ›› 2010, Vol. 68 ›› Issue (08): 827-832. Previous Articles    

Full Papers

不同结构颗粒对PMMA基复合材料性能影响

王娜*,1,2,高娜2,李洪伟2,方庆红1,2,陈尔凡1,2   

  1. (1沈阳化工学院辽宁省高校高分子材料应用技术重点实验室 沈阳 110142)
    (2沈阳化工学院材料科学与工程学院 沈阳 110142)
  • 投稿日期:2009-06-15 修回日期:2009-10-12 发布日期:2009-12-24
  • 通讯作者: 王娜 E-mail:iamwangna@sina.com
  • 基金资助:

    国家自然科学基金资助项目(10772122);辽宁省自然科学基金资助项目(20082022);辽宁省高等学校优秀人才支持计划(2008RC41);辽宁省教育厅创新团队项目(2009T079)

Influence of Different Structural Particle on the Properties of PMMA Composites

Wang Na*,1,2 Gao Na2 Li Hongwei2 Fang Qinghong1,2 Chen Erfan1,2   

  1. (1 Education Department of Liaoning Province, Key Laboratory of Applied Technology of Polymer Materials, Shenyang Institute of Chemical Technology, Shenyang 110142)
    (2 School of Material Science/Engineering, Shenyang Institute of Chemical Technology, Shenyang 110142)
  • Received:2009-06-15 Revised:2009-10-12 Published:2009-12-24

PMMA/MCM-41 (with template), PMMA/SBA-15 (with template), PMMA/SiO2 composites were prepared by in situ polymerization. The effect of mesoporous molecular sieves MCM-41, SBA-15 and SiO2 on the mechanical properties and the thermal stability of PMMA composite were investigated. The thermal stability of PMMA/MCM-41 (with template) and PMMA/SBA-15 (with template) were greatly enhanced as compared with PMMA. The impact properties of PMMA/SBA-15 (with template) composite were improved by 68.2% compared with PMMA at the 1.2% low filler loading. The CTAB and P123 template in the mesopores or on the outer surface of the particle could provide physical entanglement with PMMA matrix to increase miscible. Because the P123 (EO20PO70EO20) surfactant had larger PO/EO ratio, which possessed relatively higher hydrophobicity than the low molecular weight CTAB, PMMA/SBA-15 (with template) composite showed better properties than PMMA/MCM-41 (with template) composite.

Key words: PMMA, MCM-41, SBA-15, SiO2