SIOC English
化学学报
高级检索

化学学报 ›› 2001, Vol. 59 ›› Issue (3): 311-315. 上一篇    下一篇

研究论文

Sol-Gel法制备钙钛矿型复合氧化物YFeO~3气敏材料

葛秀涛;李永红;刘杏芹;沈瑜生   

  1. 滁州师范专科学校化学系;中国科学技术大学材料科学与工程系.合肥(230026)
  • 发布日期:2001-03-15

Preparation of perovskite type complex oxide YFeO~3 gas-sensing material by Sol-Gel method

Ge Xiutao;Li Yonghong;Liu Xingqin;Shen Yusheng   

  1. Univ Sci & Technol China, Dept Mat Sci & Engn.Hefei(230026)
  • Published:2001-03-15

PDF

462

用溶胶-凝胶法制备了YFeO~3气敏材料，并对其制备条件，导电行为和气敏效应作了系统研究，结果表明：铁钇物质的量之比n(Fe^3^+):n(Y^3^+)=1:1，800℃下热处理2h可得纯相钙钛矿型复合氧化物YFeO~3；电导测量显示，该材料呈p型半导体导电行为。2h预烧凝胶粉在800℃下热处理3h所得微粉制作的元件的电导突变温度为400℃，对乙醇有较高的灵敏度和良好的选择性，有望开发为一类新型酒敏传感器。

关键词: 溶胶-凝胶法, 钙钛矿型结构, 气敏材料, 复氧化物, 氧化铁, 氧化钇, 乙醇, 传感器

YFeO~3 gas-sensing materials were prepared by sol-gel method. The preparation conditions, phase constituents, conductance and gas sensing properties were investigated. The results shows that pure phase YFeO~3 can be obtained when calcining for two hours at 800℃ with the ratio of substance Fe^3^+ to Y^3^+(nFe^3^+:nY^3^+ being 1:1. The YFeO~3 thus obtained is a p-type semiconductor. The temperature of conductance sudden change for the element made of powder with 2 h preheating gel calcined at 800℃ for 3 h is only 400℃ , with good sensitivity and selectivity to C~2H~5OH. This material is possible to be developed into a new type of ethanol-sensing sensor.

Key words: SOL-GEL PROCESS, PEROVSKITE TYPE STRUCTURE, GAS SENSITIVITY MATERIAL, DOUBLE OXIDE, IRON OXIDE, YTTRIUM OXIDE, ETHANOL, SENSORS

中图分类号: