SIOC English
化学学报
高级检索

化学学报 ›› 2011, Vol. 69 ›› Issue (18): 2143-2147. 上一篇    下一篇

研究论文

基于聚硫堇和层层组装碳纳米管/HRP的过氧化氢传感器研究

杨绍明*，黄爱花，查文玲，魏志鹏，郑龙珍   

  1. (华东交通大学基础学院化学化工系 南昌 330013)
  • 投稿日期:2011-02-19 修回日期:2011-04-25 发布日期:2011-05-20
  • 通讯作者: 杨绍明 E-mail:yangsm@yahoo.cn
  • 基金资助:

    级联增敏型核酸适配体生物传感器研究;生物模拟膜界面纳米电化学研究;级联信号放大HRP酶电极的构筑及其在非水介质中的应用

H2O2 Biosensor Based on Poly(thionine) and Layer-by-Layer Self-assembly of Carbon Nanotubes and HRP

YANG Shao-Ming, HUANG Ai-Hua, CHA Wen-Ling, WEI Zhi-Peng, ZHENG Long-Zhen   

  1. (Department of Chemistry and Chemical Engineering, School of Basic Sciences, East China Jiaotong University, Nanchang 330013)
  • Received:2011-02-19 Revised:2011-04-25 Published:2011-05-20

PDF

1169

被引次数

6 | 5

将电聚合和层层组装方法有效结合构筑了聚硫堇(PTH)电子介体修饰的碳纳米管(CNTs)/辣根过氧化物酶(HRP)多层膜无试剂H2O2传感器. 利用电化学阻抗谱对CNTs/HRP多层膜的组装过程进行监测, 用循环伏安法和计时电流法研究了该HRP电极的电化学行为. 探讨了酶组装层数、工作电位、pH值和碳纳米管对电极响应的影响. 该传感器对过氧化氢在2.0×10－6～6.29×10－3 mol/L范围内呈良好的线性响应, 相关系数为0.998, 检测限为1.0×10－6 mol/L.

关键词: 聚硫堇, 电聚合, 层层组装, 传感器, 过氧化氢

Carbon nanotubes (CNTs)/horseradish peroxidase (HRP) multilayer reagentless H2O2 biosensor based on poly(thionine) (PTH) mediator was fabricated by the combination of electro-polymerization and layer-by-layer self-assembly method. Electrochemical impedance spectroscopy was used to monitor the layer-by-layer self-assembly process of CNTs/HRP multilayer. The electrochemical behavior of the HRP biosensor was studied by the cyclic voltammetry (CV) and chronoamperometry (I-t). The effect of the number of assembled enzyme layers, work potential, pH value and CNTs were investigated on the response of HRP electrode. The biosensor shows a good linear range of 2.0×10－6～6.29×10－3 mol/L for H2O2, R＝0.998, with a detection limit of 1.0×10－6 mol/L.

Key words: poly(thionine), electro-polymerization, layer-by-layer self-assembly, biosensor, H2O2