SIOC English
化学学报
高级检索

化学学报 ›› 2011, Vol. 69 ›› Issue (15): 1811-1816. 上一篇    下一篇

研究论文

二氧化碳气体制备层状聚苯乙烯发泡材料

廖霞*, 黄锦涛, 顾鑫   

  1. (四川大学高分子科学与工程学院 成都 610065)
  • 投稿日期:2010-12-10 修回日期:2011-03-29 发布日期:2011-04-15
  • 通讯作者: 廖霞 E-mail:xliao@scu.edu.cn

Preparation of Layered Foam Morphology Polystyrene Using Compressed Carbon Dioxide

LIAO Xia, HUANG Jin-Tao, GU Xin   

  1. (College of Polymer Science and Engineering, Sichuan University, Chengdu 610065)
  • Received:2010-12-10 Revised:2011-03-29 Published:2011-04-15
  • Contact: Xia LIAO E-mail:xliao@scu.edu.cn

PDF

1690

被引次数

2

将珠状和粒状聚苯乙烯(PS)样品模压后在高压CO2条件下饱和, 采取快速升温法制备了结构新颖的层状发泡材料. 通过扫描电子显微镜(SEM)以及不同饱和条件下CO2在PS中溶解度的分析, 初步研究了区域性弱链段缠结力对气体成核、泡孔形态、泡孔尺寸和分布的影响. 结果表明珠状PS在压制成型过程中其珠粒界面链段相互作用力较弱. 由于基体中界面区域链段的缠结能力不同, 在不同区域CO2气体的成核和增长也不同, 通过控制发泡的过程参数, 可以得到独特的PS层状泡孔形态.

关键词: 二氧化碳, 聚苯乙烯, 层状发泡形态

The sample prepared by compression molding polystyrene (PS) beads and pellets was saturated in compressed carbon dioxide (CO2). After reaching equilibrium, the sample was foamed by temperature soaking method. Intriguing layered foam morphology was obtained. The effect of weak chain entanglements on the bubble nucleation, cell morphology, cell size and distribution were investigated by scanning electron microscopy (SEM) and the solubility measurement of CO2 in PS. The results indicated that the weak entanglements of chains were introduced into the interfaces between the beads in bead PS during the compression molding process. Due to the different chain entanglement ability in the matrix, the bubble growth and nucleation of CO2 gas in different regions were not the same. By controlling the parameters of foaming process, unique and novel structures with layered foams were generated.

Key words: carbon dioxide, polystyrene, layered foam morphology