SIOC English
有机化学
高级检索

有机化学 >

2013 , Vol. 33 >Issue 12: 2583 - 2587

DOI: https://doi.org/10.6023/cjoc201309026

研究简报

双酚A双甲基丙烯酸缩水甘油酯基复合树脂的合成及性能研究

  • 钱文昊 ,
  • 徐培成 ,
  • 苏俭生 ,
  • 陆国林 ,
  • 黄晓宇
展开
  • a 上海市徐汇区牙病防治所 上海 200032;
    b 同济大学口腔医学院 上海 200072;
    c 中国科学院上海有机化学研究所 上海 200032

收稿日期: 2013-09-17

  修回日期: 2013-10-12

  网络出版日期: 2013-10-28

基金资助

国家自然科学基金(No. 21274162)、上海市卫生局科研课题(Nos. 2009258，20124122)资助项目.

收起

Synthesis and Properties of Bis-GMA-Based Composite Resin

  • Qian Wenhao ,
  • Xu Peicheng ,
  • Su Jiansheng ,
  • Lu Guolin ,
  • Huang Xiaoyu
Expand
  • a Department of Stomatology, Shanghai Xuhui District Dental Center, Shanghai 200032;
    b Department of Prosthodontics, College of Stomatology, Tongji University, Shanghai 200072;
    c Shanghai Institute of Organic Chemistry, Chinese Academy of Sciences, Shanghai 200032

Received date: 2013-09-17

  Revised date: 2013-10-12

  Online published: 2013-10-28

Supported by

Project supported by the National Natural Science Foundation of China (No. 21274162) and the Scientific Research Project of Shanghai Municipal Health Bureau (Nos. 2009258, 20124122).

Fold

摘要

以双酚A双甲基丙烯酸缩水甘油酯(Bis-GMA)为树脂基质，分别加入三乙二醇二甲基丙烯酸酯(TEDMA)和甲基丙烯酸羟乙酯(HEMA)为辅助单体，以纳米二氧化硅为无机填料，通过共混合原位聚合分别制备了两种复合树脂粘结剂：粘结剂A为Bis-GMA与TEDMA的交联共聚物与纳米二氧化硅的复合树脂，粘结剂B为Bis-GMA与HEMA的交联共聚物与纳米二氧化硅的复合树脂. 用这两种粘结剂将纤维桩与牙根粘结，并研究了温度与机械疲劳对这两种粘结剂的剪切粘结强度的影响.

关键词： 双酚A双甲基丙烯酸缩水甘油酯; 复合树脂; 无机填料; 剪切粘结强度

本文引用格式

钱文昊 , 徐培成 , 苏俭生 , 陆国林 , 黄晓宇 . 双酚A双甲基丙烯酸缩水甘油酯基复合树脂的合成及性能研究[J]. 有机化学, 2013 , 33(12) : 2583 -2587 . DOI: 10.6023/cjoc201309026

Abstract

Two composite resin bonders were prepared via in-situ polymerization and blending method using Bis-GMA as resin matrix and nano-SiO2 as inorganic filler. Composite resin bonder A was composed of crosslinked copolymer of Bis-GMA/TEDMA and nano-SiO2, and composite resin bonder B contained crosslinked copolymer of Bis-GMA/HEMA and nano-SiO2. Both composite resins were employed as luting agent to bond fiber posts into root canals and the effects of temperature fatigue and mechanical fatigue on their shear bonding strength were studied.

Key words： bis-GMA; composite resin; inorganic filler; shear bond strength

参考文献

[1] Xu, J. W.; Stangel, I.; Ellis, T.; Sacher, E. WO 2000010478, 2001 [Chem. Abstr. 2001, 132, 185486].

[2] Gauthier, M. A.; Zhang, Z.; Zhu, X. X. ACS Appl. Mater. Interf. 2009, 1, 824.

[3] Davy, K. W. M.; Kalachandra, S.; Pandain, M. S. Biomaterials 1998, 19, 2007.

[4] Li, X.; Shi, C. X.; Zhu, G. D. Inter. J. Biomed. Eng. 2004, 27, 318 (in Chinese). (李潇, 施长溪, 朱光第, 国外医学: 生物医学工程分册, 2004, 27, 318.)

[5] Sakaguchi, R. L.; Wiltbank, B. D.; Murchison, C. F. Dental Mater. 2005, 21, 43.

[6] Royse, M. C.; Ott, N. W.; Mathieu, G. P. Pediatr. Dent. 1996, 18, 440.

[7] Zhao, M. Z.; Ji, Q. Chin. J. Prosthodont. 2008, 9, 76 (in Chinese). (赵明哲, 汲平, 口腔颌面修复学杂志, 2008, 9, 76).

[8] Li, Q.; Xiong, Y. M. J. Modern Stomatol. 2008, 22, 94 (in Chinese). (刘泉, 熊颖铭, 现代口腔医学杂志, 2008, 22, 94).

[9] Zhang, Z. M.; Guo, X. Y. Tong, Y. Chem. Ind. Times 2006, 20, 7 (in Chinese). (张增明, 郭晓燕, 仝毅, 化工时刊, 2006, 20, 7.)

Options
文章导航

/

〈 〉