化学学报 ›› 2007, Vol. 65 ›› Issue (2): 170-172. 上一篇    下一篇

研究简报

高硅SAPO-34与聚四氟乙烯复合材料的合成

王利军*,1, 解丽丽1, 袁昊1, 李庆华1, 李全芝2   

  1. (1上海第二工业大学环境工程系环境功能材料实验室 上海 201209)
    (2复旦大学化学系分子催化与创新材料实验室 上海 200433)
  • 投稿日期:2006-04-26 修回日期:2006-07-24 发布日期:2007-01-28
  • 通讯作者: 王利军

Synthesis of High-silica SAPO-34 and Polytetrafluoroethylene Com-posite Material

WANG Li-Jun*,1; XIE Li-Li1; YUAN Hao1; LI Qing-Hua1; LI Quan-Zhi2   

  1. (1 Department of Environmental Engineering, Shanghai Second Polytechnic University, Shanghai 201209)
    (2 Laboratory of Molecular Catalysts and Innovative Materials, Depart-ment of Chemistry, Fudan University, Shanghai 200433)
  • Received:2006-04-26 Revised:2006-07-24 Published:2007-01-28
  • Contact: WANG Li-Jun

以二乙胺为结构导向剂, 在聚四氟乙烯乳液中水热法合成了高硅SAPO-34与聚四氟乙烯复合材料. XRD表明合成样品为SAPO-34结构, SEM照片表明型貌完好, 周围牢固地覆盖着聚四氟乙烯材料. 与不加聚四氟乙烯乳液合成样品相比, 添加后晶粒尺寸增大, 晶型更完好, 疏水和成膜性能提高.

关键词: 二乙胺, 高硅, SAPO-34, 聚四氟乙烯, 复合材料

In this paper, combined material of high-silica SAPO-34 with polytetrafluoroethylene (PTFE) was hydrothermally synthesized with diethylamine as the structure-director. It is indicated that the synthesized sample possesses SAPO-34 structure from XRD spectrum and perfect shape surrounded firmly by PTFE material from SEM images. Compared with sample synthesized without PTFE, SAPO-34 in the combined material is much larger in size and perfect in shape. And its hydrophobic and flexible membranous properties have been enhanced.

Key words: diethylamine, high-silica, SAPO-34, polytetrafluoroethylene, combined material