化学学报 ›› 2017, Vol. 75 ›› Issue (4): 391-397.DOI: 10.6023/A16110624 上一篇    下一篇

研究论文

Pickering乳液法制备聚苯胺-石墨烯空心微球

郑媛, 罗静, 魏玮, 刘晓亚   

  1. 江南大学化学与材料工程学院 食品胶体与生物技术教育部重点实验室 无锡 214122
  • 投稿日期:2016-11-25 发布日期:2017-03-07
  • 通讯作者: 罗静,E-mail:jingluo19801007@126.com E-mail:jingluo19801007@126.com
  • 基金资助:

    项目受国家自然科学基金(No.51573072)和江苏省“六大人才高峰”(XNY-012)资助.

Polyaniline-graphene Hollow Spheres based on Graphene Stabilized Pickering Emulsions

Zheng Yuan, Luo Jing, Wei Wei, Liu Xiaoya   

  1. The Key Laboratory of Food Colloids and Biotechnology, Ministry of Education, School of Chemical and Material Engineering, Jiangnan University, Wuxi 214122
  • Received:2016-11-25 Published:2017-03-07
  • Contact: 10.6023/A16110624 E-mail:jingluo19801007@126.com
  • Supported by:

    Project supported by the National Natural Science Foundation of China (No. 51573072) and the Six Talents Peak Project of Jiangsu Province (XNY-012).

通过对石墨烯进行磺酸化改性使其具有双亲性,以改性后的磺化石墨烯(SGR)作为Pickering乳化剂稳定含有苯胺的油相,加入过硫酸铵引发剂,采用Pickering乳液聚合的方式一步合成具有独特空心结构的聚苯胺-石墨烯微球(PANI-SGR HS).详细探究了石墨烯磺化程度、乳化剂浓度和油水比等因素对磺化石墨烯稳定乳液的影响,研究结果表明:SGR的润湿性对Pickering乳液的稳定性有着重要影响;SGR浓度为0.5 mg·mL-1时即可以稳定乳液,随着SGR浓度的增大,Pickering乳液滴尺寸呈减小趋势;在油相体积分数小于60%时,即可以得到比较稳定的乳液.利用扫描电子显微镜对微球的形貌进行了表征,并对所制备空心微球的电化学性能进行了探究,在电流密度为1 A·g-1时,其修饰电极的比电容可达480.59 F·g-1,相比于普通二维PANI-SGR提高了103.5%.

关键词: 石墨烯复合材料, 聚苯胺, Pickering乳化剂, 空心微球, 电化学性能

In recent years, hybrid nanomaterials of graphene and polyaniline have attracted extensive interest and have been considered as promising electrode materials for supercapacitor combining the advantages of both materials with synergistic effects. In contrast to the well-developed two-dimensional planar structure of graphene-PANI, the pursuit of hollow gra-phene-PANI hybrid structure is relatively less investigated. The hollow micro/nanostructured graphene-PANI materials with the nanoscale shell, inner cavity and pore structures, is highly expected to exhibit remarkable enhanced supercapacitor performance owing to the enhanced specific surface area and shortened diffusion length for both charge and mass transport. In this work, a novel kind of graphene-polyaniline hollow capsules (PANI-SGR HS) was prepared via Pickering emulsion polymerization using sulfonated graphene (SGR) as Pickering stabilizer. Amphiphilic sulfonated graphene is prepared by a covalent modification and used to stabilize oil phase containing aniline monomer. Aniline molecules were adsorbed to the oil-water interface owing to the electrostatic interaction between amino groups of aniline and sulfonic groups of SGR, which subsequently underwent interfacial polymerization at the oil/water interface upon the addition of initiator ammonium persulfate (APS). The effects of the sulfonation degree of graphene, the SGR concentration as well as the oil/water volume ratio on the stability and morphology of SGR stabilized emulsions were investigated in detail. The SGR with appropriate sulfonation degree can produce stable emulsions. The average diameter of the emulsion droplet decreased with the increasing concentration of SGR stabilizer. The emulsion stability can be improved with the increased water phase infraction. After polymerization of aniline and removal of the oil phase, three-dimensional hollow graphene-polyaniline sphere (PANI-SGR HS) was obtained. The morphology of PANI-SGR HS was observed by scanning electron microscopy (SEM). The special hollow sphere structure not only enlarged the liquid contact area but also improved charge carrier mobility. The hollow sphere modified electrode exhibited excellent performance with a specific capacitance of 480.59 F·g-1 at 1 A·g-1, which is much higher than 251 F·g-1 of the common two-dimensional stacked graphene-polyaniline film. This novel three-dimensional PANI-SGR HS material may have potential applications in energy storage.

Key words: graphene composite, polyaniline, Pickering stabilizer, hollow sphere, electrochemistry