SIOC English
化学学报
高级检索

化学学报 ›› 2009, Vol. 67 ›› Issue (3): 249-254. 上一篇    下一篇

研究论文

环氧丙烷聚醚三元醇/聚乳酸嵌段共聚物的合成与性能

逯 琪a 杨冬梅a 张宇婷a 于 瀛a 李速明a
涂建军b 王 巍b 范仲勇*,a

  

  1. (a复旦大学材料科学系 上海 200433)
    (b上海石油化工研究院 上海 201208)

  • 投稿日期:2008-03-24 修回日期:2008-09-20 发布日期:2009-02-14
  • 通讯作者: 范仲勇

Synthesis and Characterization of Poly(propylene oxide-lactide) Diblock Copolymer

Lu, Qi a Yang, Dongmei a Zhang, Yuting a Yu, Ying a Li, Suming a
Tu, Jianjun b Wang, Wei b Fan, Zhongyong *,a
  

  1. (a Department of Materials Science, Fudan University, Shanghai 200433)
    (b Shanghai Research Institute of Petrochemical Technology, Shanghai 201208)
  • Received:2008-03-24 Revised:2008-09-20 Published:2009-02-14
  • Contact: Fan, Zhongyong

PDF

1859

被引次数

23 | 6

以低不饱和度环氧丙烷聚醚三元醇与L型及DL型丙交酯为原料, 合成了不同单体物质的量比的聚醚与聚乳酸嵌段共聚物. 采用FTIR, 1H NMR, GPC对共聚物的结构进行了表征; 用DSC, DTA对共聚物的玻璃化转变温度、熔点及热分解温度进行了研究. 结果表明, 丙交酯在聚醚多元醇端羟基的引发下发生开环反应, 得到聚环氧丙烷L型乳酸(POLLA)或聚环氧丙烷DL型乳酸(PODLA)二嵌段共聚物. POLLA二嵌段共聚物具有结晶能力, 且随着L型聚乳酸链段的增长而增强. PODLA二嵌段共聚物为非晶态聚合物. 两种共聚物的玻璃化转变温度与共聚物的组成有关, 其值介于聚醚和聚乳酸玻璃化转变温度之间. 与聚醚三元醇相比, 二嵌段共聚物的耐热性得到提高, 其热分解温度提高了30～60 ℃, 约为235～262 ℃. 共聚物的结构和组成对材料的热降解机制有很大影响. PODLA在高温区发生热氧化降解.

关键词: 聚环氧丙烷, 聚乳酸, 嵌段共聚物, 合成, 性能

Different molar ratios of poly(propylene oxide-lactide) diblock copolymers were synthesized from low unsaturated poly(propylene oxide) triols and L- or DL-lactide monomers. The structure of the copolymers was determined by means of FTIR, 1H NMR and GPC, and the thermal behavior was characterized by DSC and TGA. The results turned out that poly(propylene oxide-L-lactide) (POLLA) or poly(propylene oxide-DL-lactide) (PODLA) diblock copolylmers were synthesized by ring-opening polymerization of lactide with poly(propylene oxide) triol. The POLLA diblock copolymers were semi-crystalline copolymers, and the crystallinity was increased with the increase of LLA segments. However, the PODLA diblock copolymers were amorphous ones. The glass transition temperature of the copolymers was influenced by the composition of the copolymers, and the tested Tg was between the values of the two homopolymers. Compared with poly(propylene oxide), the thermal stability of the diblock copolymers was improved. The thermal decomposition temperature of the copolymers was between 235 and 262 ℃, which was 30～60 ℃ higher than that of poly(propylene oxide). The results also showed that the chemical structures of various diblock copolymers had an effect on the thermal decomposition kinetic of samples. The mechanism of thermal oxidative decomposition of PODLA was observed in a high temperature region.

Key words: poly (propylene oxide), polylactide, copolymer, synthesize, characterization