Acta Chim. Sinica ›› 2017, Vol. 75 ›› Issue (2): 173-188.DOI: 10.6023/A16080454 Previous Articles     Next Articles

Special Issue: 先进电池材料

Review

锂硫电池先进功能隔膜的研究进展

黄佳琦a,b, 孙滢智b,c, 王云飞b, 张强b   

  1. a 北京理工大学前沿交叉科学研究院 材料学院 北京 100081;
    b 清华大学化学工程系 绿色反应工程与工艺北京市重点实验室 北京 100084;
    c 清华大学材料学院 北京 100084
  • 投稿日期:2016-08-30 修回日期:2016-11-10 发布日期:2016-11-24
  • 通讯作者: 张强,E-mail:zhang-qiang@mails.tsinghua.edu.cn;zhangqiangflotu@tsinghua.edu.cn;Tel:010-62789041 E-mail:zhang-qiang@mails.tsinghua.edu.cn,zhangqiangflotu@tsinghua.edu.cn
  • 作者简介:黄佳琦,男,博士,特别研究员,主要从事隔膜、电解质与能源材料相关领域的研究;孙滢智,男,在读本科生,主要从事高性能锂硫电池中离子选择性隔膜制备与性能研究;孙滢智,男,在读本科生,主要从事高性能锂硫电池中离子选择性隔膜制备与性能研究;张强,男,博士,万人计划青年拔尖人才,国家优秀青年基金获得者.主要从事能源材料与能源化学工程相关领域的研究.
  • 基金资助:

    项目受国家重点研发计划(No.2016YFA0202500)、国家自然科学基金(Nos.21306103,21422604)和清华大学自主科研计划(No.20161080166)资助.

Review on Advanced Functional Separators for Lithium-Sulfur Batteries

Huang Jiaqia,b, Sun Yingzhib,c, Wang Yunfeib, Zhang Qiangb   

  1. a Advanced Research Institute for Multidisciplinary Science, School of Materials Science & Engineering, Beijing Institute of Technology, Beijing 100081;
    b Beijing Key Laboratory of Green Chemical Reaction Engineering and Technology, Department of Chemical Engineering, Tsinghua University, Beijing 100084;
    c School of Materials Science and Engineering, Tsinghua University, Beijing 100084
  • Received:2016-08-30 Revised:2016-11-10 Published:2016-11-24
  • Contact: 10.6023/A16080454 E-mail:zhang-qiang@mails.tsinghua.edu.cn,zhangqiangflotu@tsinghua.edu.cn
  • Supported by:

    Project supported by the National Key Research and Development Program of China (No. 2016YFA0202500), Natural Scientific Foundation of China (Nos. 21306103 and 21422604), and Tsinghua University Initiative Scientific Research Program (No. 20161080166).

As the demand to energy storage devices for portable electronics and electric vehicles increase, lithium-sulfur (Li-S) batteries have attracted much attention for its extremely high energy density. However, the low coulombic efficiency, rapid fading capacity, and poor cycle performance of lithium anode hinder the demonstration of practical Li-S cells. The advanced functional separator/interlayer system have been proposed and verified to retard the shuttle of polysulfides and extend the cycling life of a Li-S cell. In this review, the progress on multifunctional separators/interlayers for lithium sulfur batteries are summarized, including permselective separator inhibiting polysulfide shuttles, separator with low interfacial resistance, and composite electrolyte stabilizing anode and retarding the formation of Li dendrites. New insights into challenge and opportunities of multifunctional separator/interlayer system are also prospected.

Key words: lithium-sulfur batteries, separator/interlayer, electrolyte, nanocarbon, composite electrodes, Li anode