有机化学 ›› 2014, Vol. 34 ›› Issue (5): 1021-1033.DOI: 10.6023/cjoc201311041 上一篇    下一篇

学术动态

非富勒烯类有机小分子受体材料

刘艳姣a,b, 刘菁a,b, 张林骅a, 方俊锋b, 张文俊b, 刘治田a   

  1. a 武汉工程大学材料科学与工程学院 武汉 430073;
    b 中国科学院宁波材料技术与工程研究所 宁波 315000
  • 收稿日期:2013-11-26 修回日期:2014-01-07 发布日期:2014-01-22
  • 通讯作者: 张文俊 E-mail:able.ztliu@gmail.com;zhangwenjun@nimte.ac.cn
  • 基金资助:

    国家自然科学基金(No. 51003080)、武汉市青年科技晨光计划(No. 201271031385)、湖北省自然科学基金(No. 2012FFB04705)资助项目.

Non-fullerene Organic Small Molecule Electron-Acceptors

Liu Yanjiaoa,b, Liu Jinga,b, Zhang Linhuaa, Fang Junfengb, Zhang Wenjunb, Liu Zhitiana   

  1. a School of Material Science and Engineering, Wuhan Institute of Technology, Wuhan 430073;
    b Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Science, Ningbo 315000
  • Received:2013-11-26 Revised:2014-01-07 Published:2014-01-22
  • Supported by:

    Project supported by the National Natural Science Foundation of China (No. 51003080), the Youth Science Plan for Light of the Morning Sun of Wuhan City (No. 201271031385), and the Natural Science Foundation of Hubei Province (No. 2012FFB04705).

在本体异质结太阳能电池的研究过程中,异质结活性层材料的发展一直是最基本最核心的部分,活性层材料包括给体材料和受体材料,其中给体材料的研究一直占据着主导地位,很多课题组报道的器件效率已经超过8%;而受体材料的研究却相对单一,大部分研究都围绕富勒烯及其衍生物. 近年来非富勒烯类的有机小分子受体材料由于其易于合成与纯化、通过分子设计使能级更方便调节等优点引起了人们的广泛关注并且取得了很大进展,目前以它作为受体材料的电池效率可以达到4%. 综述了近年来几类非富勒烯类有机小分子受体材料的研究进展,包括它们的分子设计及其在光伏器件中的应用,最后我们讨论了提高非富勒烯类的有机小分子受体材料器件性能的关键因素及其研究前景.

关键词: 阳能电池, 本体异质结, 小分子, 非富勒烯, 受体

To achieve high efficiency organic solar cells (OSCs), the development of donor and acceptor materials for the bulk-heterojunction (BHJ) blend is the most important part and has attracted great interest. So far, the study of donor materials is still dominant and devices with efficiency exceeded 8% are reported by many research groups. On the contrary, the developments of new acceptor materials are relatively limited, and most of them are focused on the derivatives of fullerene. Recently, organic small molecule acceptors (OSMAs), which are potential alternative to fullerene derivatives, have drawn significant interest. Compared to fullerene derivatives, OSMAs are much easier to be synthesized and purified, and the bandgap could be finely adjusted by proper molecule design. Recent reports on OSMAs show great improvement and the efficiency has reached 4%. In this review, several kinds of OSMAs, covering new molecule design and application in device fabrication are comprehensively introduced. Finally, critical challenges that determine photovoltaic performance and prospects for future directions are discussed.

Key words: solar cells, bulk-heterojunction, small-molecules, non-fullerene, acceptors