化学学报 ›› 2020, Vol. 78 ›› Issue (2): 161-169.DOI: 10.6023/A19100378 上一篇    下一篇

研究论文

聚二甲基硅氧烷封装石墨烯基柔性红外探测器的制备及其应用

赵雅婧a,c, 谢亮a,b, 马兰超b, 贺军辉a   

  1. a 中国科学院理化技术研究所 微纳材料与技术研究中心 功能纳米材料实验室 北京 100190;
    b 北京石油化工学院 材料科学与工程学院 北京 102617;
    c 中国科学院大学 北京 100049
  • 投稿日期:2019-10-22 发布日期:2020-01-10
  • 通讯作者: 贺军辉 E-mail:jhhe@mail.ipc.ac.cn
  • 基金资助:
    项目受国家自然科学基金(No.21571182)、国家重点研究开发项目(No.2017YFA0207102)、北京市先导与优势材料创新项目(No.Z151100003315018)和北京“实培计划”资助.

Preparation and Application of Polydimethylsiloxane Encapsulated Graphene-based Flexible Infrared Detector

Zhao Yajinga,c, Xie Lianga,b, Ma Lanchaob, He Junhuia   

  1. a Functional Nanomaterials Laboratory, Center for Micro/nanomaterials and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China;
    b College of Materials Science&Engineering, Beijing Institute of Petrochemical Technology, Beijing 102617, China;
    c University of Chinese Academy of Sciences, Beijing 100049, China
  • Received:2019-10-22 Published:2020-01-10
  • Supported by:
    Project supported by the National Natural Science Foundation of China (No. 21571182), the National Key Research and Development Program of China (No. 2017YFA0207102), the Science and Technology Commission of Beijing Municipality (No. Z151100003315018) and the Beijing "Practical Training Program".

采用热还原法在不同退火温度(从100到1200℃)下制备了一系列还原氧化石墨烯(rGO)薄膜,并通过X射线粉末衍射(XRD)、傅里叶变换红外光谱(FTIR)、拉曼光谱、四探针电阻仪和扫描电镜(SEM)对其进行了表征和分析.随后利用旋涂封装法制备了聚二甲基硅氧烷(PDMS)封装的石墨烯基柔性红外探测器(P-rGO-P),并成功用于红外激光、人体红外辐射、弯曲变化和压力探测.实验结果表明,采用不同温度还原的rGO薄膜封装得到的P-rGO-P柔性红外探测器在近红外(1064 nm)激光照射下均有响应,其中最高的光响应可达2.78 mA/W.此外,P-rGO-P柔性探测器对人体红外辐射和弯曲变化也具有快速、灵敏的响应,并且经过反复弯折仍能保持完整性与响应能力.

关键词: 氧化还原石墨烯, 柔性, 光电转换, 红外探测器, 压力探测器

In this paper, we prepared reduced graphene oxide (rGO) films by first drop-casting graphene oxide (GO)/ethanol dispersion on top of silicon nanowires array, followed by thermal reduction in 95% Ar-5% H2 (volume ratio) atmosphere. A series of rGO thin films were prepared by thermal reduction at different annealing temperatures ranging from 100℃ to 1200℃, and characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, four-probe square resistance tester and scanning electron microscopy (SEM). The experimental results indicate that reduction of oxygen-containing groups, dehydrogenation of C-H groups and reconstruction of C=C skeleton occurred significantly on the GO plane. Compared with the insulating GO film, the resistance of rGO thin films decreases greatly, and the sheet resistance of rGO films shows a decreasing trend with increase of reduction temperature. Then, flexible polydimethylsiloxane (PDMS) encapsulated graphene-based devices (P-rGO-P) were fabricated by spin-coating PDMS on the surface of obtained rGO films with evaporated Au interdigital electrodes. The flexible devices maintained the integrity of the rGO films while providing self-supporting characteristics. The rGO film in the device had a clear layered structure, and a certain movable space between the upper and lower PDMS layers. This sandwich structure ensures that when the P-rGO-P flexible detector is bent and squeezed, the rGO film has sufficient buffer space, and would not be subjected to excessive stress arising from adhesion to PDMS. In short, the sandwich structure endows the originally fragile device with excellent flexibility. The P-rGO-P detector was successfully applied to detecting infrared laser irradiation, human body infrared radiation, bending motions and pressure changes. The experimental results showed that the flexible encapsulated P-rGO-P infrared detectors derived from the rGO thin films reduced at varied temperatures all had response to near-infrared (1064 nm) laser irradiation, and the maximum response reached up to 2.78 mA/W. In addition, the P-rGO-P flexible detector also demonstrated fast and sensitive response to human body infrared radiation and bending changes, and could maintain its integrity and responsiveness after repeated bending.

Key words: reduced graphene oxide, flexibility, photoelectric conversion, infrared detector, strain detector