化学学报 上一篇    下一篇

研究论文

基于紫外吸收剂与固体添加剂调控的有机太阳能电池

杨云帆a†, 韩骏a†, 孙帅军a, 刘铭a, 陶武松b, 邹应萍a,*   

  1. a中南大学化学化工学院 长沙市 410083;
    b晶科能源(海宁)有限公司 海宁 314416
  • 投稿日期:2026-06-24
  • 通讯作者: *E-mail: yingpingzou@csu.edu.cn
  • 作者简介:†为共同第一作者,对本文贡献相同
  • 基金资助:
    国家自然科学基金(52125306、U24A2081),湖南省重大基础研究项目(2025JC0004) 和湖南省创新群体项目(2024JJ1013)资助项目

Organic solar cells regulated by ultraviolet absorbers and solid additive

Yunfan Yanga, Jun Hana, Shuaijun Suna, Ming Liua, Wusong Taob, Yingping Zoua,*   

  1. aCollege of Chemistry and Chemical Engineering, Central South University, Changsha 410083;
    bJinkoSolar (Haining) Co. Ltd., Haining 314416, China
  • Received:2026-06-24
  • Supported by:
    Project supported by National Natural Science Foundation of China. (No. 52125306, U24A2081),Hunan Provincial Major Basic Research Project (2025JC0004), the Natural Science Foundation of Hunan Province (2024JJ1013)

针对有机太阳能电池活性层材料在紫外光照射下易发生光化学降解,引发器件性能衰退的问题,本文采用双添加剂策略:引入紫外线吸收剂2-[2'-羟基-3',5'-双(α,α-二甲基苄基)苯基]苯并三唑(UV234)和挥发性固体添加剂1,4-二碘苯(DIB),应用于D18:L8-BO体系中,借助二者协同作用同步提升器件的光电性能与光照稳定性。UV234不仅可吸收部分紫外光,提升器件的光稳定性,还能与D18之间发生荧光共振能量转移,并通过调控给体D18的分子堆积方式,促使分子聚集转变为更有利于电荷传输的J-聚集主导模式;DIB的碘原子与D18和受体L8-BO分子中的氮原子位点产生相互作用,有效调控共混薄膜的结晶过程与相分离动力学。二者协同作用,制备出相分离尺度适宜、互穿网络结构更优、表面均匀性更佳的活性层薄膜,有效促进了激子解离与电荷传输并显著抑制了电荷复合。基于D18:L8-BO体系的器件实现了19.55%的光电转换效率(PCE),器件的紫外光稳定性得到显著增强;经功率为24 W的紫外灯持续照射408 h后,使用双添加剂协同调控的器件PCE仍保持初始效率的76%,而未经添加剂处理的器件PCE仅剩初始值的64%。

关键词: 紫外吸收剂, 固体添加剂, 有机太阳能电池, 稳定性, 形貌调控

To address the issue that active layer materials in organic solar cells are susceptible to photochemical degradation under ultraviolet (UV) light, leading to performance decay, a dual-additive strategy is employed: the UV absorber 2-[2′-hydroxy-3′,5′-bis(α,α-dimethylbenzyl)phenyl]benzotriazole (UV234) and the solid additive 1,4-diiodobenzene (DIB) are introduced into the D18:L8-BO system to synergistically enhance the device photovoltaic performance and stability. ‌ Ultraviolet-visible (UV‑Vis) absorption spectroscopy was employed to investigate the effects of two additives on the optical properties of D18, L8-BO, and their blend films. UV234 can absorb part of the UV light to boost the device’s photostability, significantly influence the molecular packing behavior of the donor D18, drive its aggregation mode to shift from a mixed state to a J-aggregation-dominated mode that is more favorable for charge transport, and undergo Förster resonance energy transfer (FRET) with D18, as evidenced through photo-luminescence spectral analysis. Meanwhile, the iodine atoms of DIB interact with the nitrogen atom sites in D18 and the acceptor L8-BO molecules, effectively modulating the crystallization process and phase-separation kinetics of the blend film. The surface and bulk morphology of the blend films were investigated via atomic force microscopy (AFM) and transmission electron microscopy (TEM). Furthermore, the Flory-Huggins interaction parameters (χ) were employed to evaluate the miscibility between D18 and L8-BO. A film with an appropriate phase-separation scale, an improved interpenetrating network structure, and a more uniform surface is obtained, which effectively promotes exciton dissociation and charge transport while significantly suppressing charge recombination. To investigate the impact of different treatments on photovoltaic performance, conventional devices with the structure of ITO/2-PACz/D18:L8-BO/PNDIT-F3N/Ag were fabricated. The dual additives processed device based ultimately achieves a power conversion efficiency (PCE) of 19.55%, and its UV photostability is remarkably enhanced: after continuous irradiation under a 24 W UV lamp for 408 h, the PCE of the device co-regulated by the dual additives retains 76% of its initial efficiency, whereas the PCE of the untreated device drops to 64%.

Key words: ultraviolet absorbent, solid additive, organic solar cells, stability, morphology regulation